How to Set Up Seat Easy Exit in a Lexus Rx 2015
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be memorized and recalled with the touch of a button. It is also possible to set this function to activate automatically
when the doors are unlocked.
Three different driving positions can be entered into memory.
Entering a position to memory
1. Turn the �POWER� switch to ON mode.
2. Adjust the driver�s seat, steering wheel and outside rear view mirrors to the desired positions.
3. Press the �SET� button, then within 3 seconds press button �1�, �2� or �3� until the signal beeps.
If the selected button has already been preset, the previously recorded position will be overwritten.
Recalling the memorized position
1. Check that the shift lever is set in P.
2. Turn the �POWER� switch to ON mode.
3. Press button �1�, �2� or �3� until the signal beeps to recall the desired position.
Linking driving position memory with door unlock operation
Record your driving position to button �1�, �2� or �3� before performing the following:
Carry only the key (including the card key) to which you want to link the driving position. If 2 or more keys are in the vehicle, the driving position cannot be linked properly.
1. Shift the shift lever to P and close the driver's door. Turn the �POWER� switch to ON mode.
2. Press the desired button (�1�, �2� or �3�) to recall the position. Then, while keep pressing the button, press the driver's door lock switches (either lock or unlock) until the signal beeps.
The driving position is recalled when the driver's door is unlocked using the entry function or wireless remote control and the driver's door is opened.
Operating the driving position memory after turning the �POWER� switch off
Memorized positions (except for the steering wheel position) can be activated up
to 180 seconds after the driver�s door is opened and another 60 seconds after it is
closed again, even after turning the �POWER� switch off.
Canceling the linked door unlock operation
1. Turn the �POWER� switch to ON mode and close the driver's door.
2. While pressing the �SET� button, press the driver�s door lock switches (either lock or unlock) until the signal beeps.
Stopping seat position operation part-way through
Perform any of the following operations: Press the �SET� button.
Press button �1�, �2� or �3�.
Adjust the seat using the switches (only cancels seat position recall).
Adjust the steering wheel using the tilt and telescopic steering control switch
(only cancels steering wheel position recall).
Correct seat position
When the seat is in the most forward or most backward position, and the seat is
being moved in those directions, the system may not correctly recognize the current
position and the memorized position will not be correctly recalled.
When the power easy access system is activated
If a seat position is memorized, the driver seat will move back the set distance
from that memorized position.
CAUTION:
Seat adjustment caution
Take care during seat adjustment so that the seat does not strike the rear passenger
or squeeze your body against the steering wheel.
See also:
Thrust vs. Thrift
Thanks to the drivetrain's immediate thrust, the CT 200h has adequate oomph for driving solo: It scoots from a stoplight well enough and maintains highway speeds with little trouble. But it lacks ...
Safety Connect
Safety Connect is a subscription-based telematics service that uses Global Positioning System (GPS) data and embedded cellular technology to provide safety and security features to subscribers. Safe ...
Setting up a Bluetooth� enabled portable player
Registering a portable player in the Bluetooth� audio system allows the system to function. The following functions can be used for registered portable players: Functions and operation procedures ...
Source: https://www.lexomans.com/manguide-609.html
0 Response to "How to Set Up Seat Easy Exit in a Lexus Rx 2015"
Post a Comment